Editing Effect Parameters; Adjusting The Effect Depth For Each Part; Selecting An Effect Type For Each Block - Yamaha Tyros5 Reference Manual

Editing EFFECT Parameters

This instrument features eleven Effect Blocks, giving you powerful tools to richly enhance the sounds of the
instrument or completely transform them. The Effects are divided into the following groups:
 Reverb, Chorus
The Effects of these Blocks are applied to the overall sound or all Parts. In each of these Effect Blocks, you can select
only one Effect Type at a time and adjust the Send Level (Depth) for each Part as well as the Return Level for all Parts.
 DSP1
When the Connection is set to "System" on the EFFECT PARAMETER EDIT display
Block are applied only to the Style and Song sounds. In this status, you can select only one Effect Type at a time and
adjust the Send Level (Depth) for each Part as well as Return Level for all Parts. When the Connection is set to
"Insertion" on the EFFECT PARAMETER EDIT display, the Effect of this Block is applied to a specific channel of
the Style and Song.
 DSP2-9
The Effects of these Blocks are applied to a specific Part or Channel, with the exception of the Multi Pads and
microphone input. Different Effect Types can be selected for each of the available Parts or Channels.

Adjusting the Effect Depth for Each Part

Use the [B]–[E] or [G]–[J] buttons to select the desired Effect Block, then use the [1 ]–[8 ] buttons to adjust
the Effect Depth for each Part.

Selecting an Effect Type for Each Block

This section covers how to change the Effect Type of each Effect Block. The settings here can be saved to a
Registration Memory, Song or Style.
1
Call up the desired page from PANEL, SONG or STYLE via the [MIXING CONSOLE] but-
ton.
NEXT PAGE
118 Tyros5 Reference Manual
(page 120), the Effects of this