Kyocera TASKalfa 6501i User Manual page 12

Installation
8
9
10
11
12
13
1-5
KYOCERA Net Direct Print
This utility makes PDF printing easier.
FONTS
This utility loads screen fonts that match the printer's fonts.
If you want to remove a product from the Products to Install list, select it and
click Remove at the bottom of the list box. To remove all products, click
Remove all.
You can select Use host name as port name to use a host name for the
Standard TCP/IP port. (Not available with a USB connection.)
For each printing device and driver combination in the Products to Install list,
you can click the Edit icon to open a dialog box with installation options for the
drivers. Make your selections from the available options. See Editing Driver
Properties and Viewing Utility Properties for details.
Review your settings. At least one printing device, driver, or a utility, must be
selected to enable the Install button. If your settings are correct, click Install.
During the installation, you can expand or collapse the installation detail by
clicking the arrow. When the installation completes successfully, on the
Finished page you can select from the following options. These options only
appear after a printer driver installation.
Print a test page
Select this option to test the connection and operation of the printing device.
If the installation is successful, the Windows Printer Test Page, containing
your computer name and information on your printer driver and port settings,
prints at the newly installed printing device.
Device Settings
Select the Device Settings check box to open Device Settings where you
can choose installed options for your printing system. (The Device Settings
check box appears only in Windows XP with a network connection.)
Enable Status Monitor
The Status Monitor shows system status messages on your computer
screen during printing tasks. The Status Monitor button appears on the
Advanced tab. Select the check box to enable it.
Show Quick Print tab
This selection lets you define basic print options into group profiles that can
be accessed easily. The Show Quick Print tab option also appears in
Device Settings > Administrator > General.
To exit the installer application click Finish.
A message may appear if there is a software installation failure. After clicking
Finish, retry the installation. If the same message appears again, contact your
system administrator.
The installation of the printer is now complete. If prompted, restart your
computer.
User Guide