Settings For Bluetooth Mobile Phone - Kenwood DDX6033BT Instruction Manual

Settings for Bluetooth mobile phone

1
On <Top Menu>:
2
Menu items Selectable setting/item
Phone Shows the connected phone device name.
Device
♦ ON
Auto
Response
♦ OFF
♦ ON
SMS Notify
♦ OFF
♦ System
Ring Mode
♦ Phone
Ring Tone When <Ring Mode> is set to <System>, press [Enter], then select the ring
Change tone for received calls and SMS from <Tone1>, <Tone2>, <Tone3>.
♦ Call Tone
♦ Message
Tone
62
English
3
: The unit answers the incoming calls automatically in 5
seconds.
: The unit does not answer the calls automatically. Answer
the calls manually.
: The unit informs you of the arrival of a message by ringing
and displaying "Receiving Message. "
: The unit does not inform you of the arrival of a message.
: The ring tone set on the unit is used.
: The ring tone set on the mobile phone is used. (This
function may not work depending on the mobile phone.)
: Selects the ring tone for phone calls.
: Selects the ring tone for SMS.
Initial: Underlined