Using The Steering Remote Controller - Kenwood DDX6033BT Instruction Manual

Using the steering remote controller

You can assign the functions to the keys of the remote controller on the steering wheel.
• This function is available only when your vehicle is equipped with the electrical steering
remote controller.
• You can only register/change the functions while you are parked.
• If your steering remote controller is not compliant, learning may not be completed and an
error massage may appear.
Registering/Changing the
functions
1
On <Top Menu>:
2
3
4
Press a steering remote
controller button to register/
change.
5
Select a function to assign.
6
Repeat steps
necessary.
7
Press [Done].
• You can have the unit learned all buttons
at a time. In that case, press the all buttons
one at a time and after pressing all of them,
touch [Done] in Steering Remote Control
Setting screen. However, new functions
cannot be learned after this operation.
• When changing the function already
learned, touch the button you want to
4
change in step and then touch to select
the changed function from the function
list.
• Confirm the contents of the settable
function on the function list. You cannot
edit the function list.
Initializing the settings
1
In step 2 in the left column:
2
4 5
and as
English
47