Tuner Operation; Auto Memory; Tuner Setting - Kenwood KDC-400U Instruction Manual

Tuner operation

For the basic operations to listen to the radio, refer
to the Quick Start Guide.

Auto memory

You can register 18 (FM)/ 6 (AM) stations with good
reception automatically.
1
Select the Tuner source
Press the [SRC] button.
Select the "TUNER" display.
2
Enter the Function setting mode
Press and hold the Control knob.
3
Select the Auto memory function item
Select the following items using the Control
knob.
"Settings" > "Auto Memory"
4
Start storing stations in the Auto memory
mode
Turn the Control knob to select "YES", and then
press the Control knob.
When 18 (FM)/ 6 (AM) stations that can be received
are stored in the memory, the process in this mode
is completed.
20
|
KDC-400U

Tuner setting

You can set up the tuner.
1
Select the Tuner source
Press the [SRC] button.
Select the "TUNER" display.
2
Enter the Function setting mode
Press and hold the Control knob.
3
Select the Settings item
Turn the Control knob to select "Settings", and
then press the Control knob.
4
Select a desired Tuner setting item
Turn the Control knob to select Tuner setting
item, and then press the Control knob.
Display Description
"Settings"
"Seek Mode" Sets the tuning mode.
Auto1: Automatic search for a station.
Auto2: Search in order of the stations in the
preset memory.
Manual: Normal manual tuning.
"MONO" You can reduce the noise when stereo
broadcasts are received as monaural.
"ON" / "OFF"
"TI" Switches to the traffic information
automatically when the traffic bulletin starts.
"ON" / "OFF"
( : Factory setting)
5
Select a setting and determine it
Turn the Control knob to select a desired tuner
setting, and then press the Control knob.
The previous item is displayed.
6
Exit the Function setting mode
Press and hold the [ ] button.
Function of remote control
Direct access tuning
You can search for a station directly by entering
frequency.
1
Enter the Direct access tuning mode
Press the [DIRECT] button on the remote
control.
"– – – –" is displayed.
2
Enter the frequency
Press the number buttons on the remote
control.
Example:
Desired frequency Press the following buttons
92.1 MHz (FM) [9], [2], [1]
810 kHz (AM) [8], [1], [0]
3
Search for the frequency
Press the [4] or [¢] button on the remote
control.
Canceling Direct access tuning mode
Press the [ ] button on the remote control.
Contents
21
|
English