Siriusxm Advisory Messages; Control Knob - Kenwood KDC-400U Instruction Manual

Cd-receiver
Table of Contents

Advertisement

Troubleshooting guide
The messages shown below indicates your
system condition.
"TOC Error"
• The CD is quite dirty. The CD is upside-down. The CD is
scratched a lot.
• The disc is unreadable.
"IN" (blink)
• The CD player section is not operating properly.
➪ Reinsert the CD. If the CD cannot be ejected or the
display continues to blink even when the CD has
been properly reinserted, please switch off the power
and consult your nearest service center.
"Protect" (blink)
• The speaker wire has short-circuited or touched the
chassis of the vehicle, and then the protection function
has been activated.
➪ Lay or insulate the speaker cable properly and press
the Reset button. If "Protect" does not disappear,
consult your nearest service center.
"NA File"
• An Audio file is played in a format that is not supported
by this unit.
"Copy PRO"
• A copy-protected file is played.
"Read Error"
• The file system of the connected USB device is broken.
➪ Copy the files and folders for the USB device again. If
"Read Error" is still displayed, initialize the USB device
or use another USB device.
"No Device"
• A USB device is selected as a source although no USB
device is connected.
➪ Change the source to any source other than the
USB device. Connect an USB device, and change the
source to the USB device again.
"N/A Device"
• An unsupported USB device is connected.
• Connection to the iPod has failed.
➪ Check that the connected iPod is supported. See
<About the Audio file> (page 48)
for information
on supported iPods.
"No Music Data"
• The connected USB device contains no playable audio
file.
• A medium that does not have playable data has been
played.
"iPod Error"
• Connection to the iPod has failed.
➪ Remove the USB device and then reconnect it.
➪ Reset iPod/ iPhone.
"Memory Full"
• The tag memory of SiriusXM tuner is FULL.
"iPod Full"
• The iPod memory is FULL.
"No TAG Function"
• An iPod which does not support the tag memory has
been connected.
52
|
KDC-400U
"Pandora Error 01"
• Registration in Bookmark has failed.
"Pandora Error 02"
• Deletion of the station has failed.
"Pandora Error 03"
• Registration of the station has failed.
"Pandora Error 04"
• The number of registered stations has reached the upper
limit.
➪ Retry after deleting an unnecessary station.
"Pandora Error 05"
• Registration of Thumbs Up/Down has failed.
"Pandora Error 06"
• Keyword search has failed.
"No Station"
• There is no receivable station.
"No skips remaining"
• No more skips are allowed now.
➪ Retry after a while.
"Check Device"
• Any device ready for Pandora internet radio reception is
not connected to this unit.

SiriusXM Advisory Messages

"Check Tuner"
• A SiriusXM tuner is not connected to this unit.
➪ Check that the connected SiriusXM tuner is
connected.
"Subscription Updated - Press Enter to Continue"
• The SiriusXM subscription has been renewed.
➪ Pressing the Control knob will clear the error
message.
"Ch Unavailable"
• The currently selected channel is unavailable.
"Chan Unsub"
• The currently selected channel is not subscribed to.
"Incorrect Code"
• The entered pass code is incorrect.
"Check Antenna"
• No antenna is connected to the SiriusXM tuner.
➪ Check that an antenna is connected to the SiriusXM
tuner.
"No Signal"
• No SiriusXM radio signal is received.
➪ Check that an antenna is connected to the SiriusXM
tuner.
"Alert Memory Full"
• The number of Alert content has reached the upper limit.
➪ Retry after deleting unnecessary Alert content.
"Song Stored"
• The song you attempted to register as Alert content has
already been registered.
"Artist Stored"
• The artist you attempted to register as Alert content has
already been registered.
"Art/Sng Unavail"
• The content currently being received cannot be
registered as a content alert item regardless of whether its
artist or song name is stored.
Contents
53
|
English

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents