Disconnecting From A Network - Dell B1265dfw User Manual

Wireless network setup
Canceling the connection process
To cancel the wireless network connection when the machine is connecting to
the wireless network, press and release the
control panel. You need to wait 2 minutes to re-connect to the wireless
network.

Disconnecting from a network

To disconnect the wireless network connection, press the
the control panel for more than two seconds.
• When the Wi-Fi network is in idle mode: The machine is immediately
disconnected from the wireless network and the WPS LED turns off.
• When the Wi-Fi network is being used: While the machine waits until the
current job is finished, the light blinks fast on the WPS LED. Then, the
wireless network connection is automatically disconnected and the WPS
LED turns off.
(power/cancel) button on the
(WPS) button on
18
Setup using Windows
Dell Printer Easy Wi-Fi Install
Before Using Dell Printer Easy Wi-Fi Install, please ensure that OS of your
computer should be Windows 7 and above.
• Items to prepare
- Access point
- Wireless network-connected computer
- Software CD that was provided with your machine
1 Turn on your computer, access point and machine.
2 Connect your computer to the wireless network.
3 Insert the supplied software CD into your CD/DVD drive.
The software CD should automatically run and an installation window
will appear.
If the installation window does not appear, click Start > All programs >
Accessories > Run.
X:\Setup.exe replacing "X" with the letter, which represents your CD/
DVD drive and click OK.
2. Using a Network-Connected Machine
156