Ipv4 Configuration Using Setip (Mac) - Dell B1265dfw User Manual

Wired network setup
7 Enter the machine's new information into the configuration window as
follows. In a corporate intranet, you may need to have this information
assigned by a network manager before proceeding.
Find the machine's MAC address from the Network Configuration Report
(see "Printing a network configuration report" on page 135) and enter it
without the colons. For example, 00:15:99:29:51:A8 becomes
0015992951A8.
8 Click Apply, and then click OK. The machine will automatically print the
Network Configuration Report. Confirm that all the settings are
correct.

IPv4 configuration using SetIP (Mac)

Before using the SetIP program, disable the computer firewall from System
Preferences > Security > Firewall.
The following instructions may vary from your model.
1 Connect your machine to the network with a network cable.
2 Insert the supplied software CD into your CD/DVD drive.
Double-click the CD/DVD icon that appears on your Mac desktop.
3
• For Mac OS X 10.8, Double-click the CD/DVD icon that appears on
your Finder.
4 Double-click the MAC_Installer folder > Installer OS X icon.
5 Click Continue.
6 Read the license agreement and click Continue.
7 Click Agree to agree to the license agreement.
8 Click Install. All components necessary for machine operations will be
installed.
If you click Customize, you can choose individual components to install.
2. Using a Network-Connected Machine
136