Zbd7000 And Zbd7100 - GE Monogram ZBD6400 Owner's Manual

You can locate
your model
number on the
inside upper tub
flange.
Throughout this
manual, features
and appearance
may var y from
your model.
Control
Settings
14
ZBD7000 & ZBD7100
1
1. Cycle Selections—The light on the selected pad will illuminate to indicate which cycle has been
selected.
For heavily-soiled dishes or cookware with dried-on or baked-on soils.
POTS & PANS
Everyday dishes may be included. This cycle may not remove burned-on foods.
NORMAL For loads of everyday dishes, glasses and cookware with medium soils.
WASH NOTE: For heavily soiled dishes, choose NORMAL WASH plus HIGH water
temperature option.
CHINA For lightly soiled china and crystal, or recently used, lightly soiled dishes
CRYSTAL and glassware to be washed in a short time at moderate temperatures up to
125°F (51°C).
RINSE ONLY For rinsing partial loads that will be washed later. Do not use detergent with
this cycle.
2. WATER TEMP— This button provides extra heat options to increase water temperature for
optimum performance.
NORMAL This is the default setting—provides a wash and rinse with water temperatures
up to 131°F (55°C) in the NORMAL cycle and 145°F (63°C) in POTS &
PANS.
HIGH This water temp selection provides a wash and rinse with water temperatures
up to 135°F (57°C) in the NORMAL cycle and 155°F (68°C) POTS & PANS.
SANITIZE This water temp selection provides a sanitizing wash and rinse with water
temperatures up to 160°F (71°C) in the NORMAL cycle and 171°F (77°C) in
POTS & PANS. This selection cannot be used with RINSE ONLY or CHINA
CRYSTAL. At the end of the wash cycle, the SANITIZE OPTION light will
remain illuminated to indicate that the sanitization conditions have been met.
NSF INTERNATIONAL
Meets NSF Standard 184 Sanitization and Cleaning performance
of household spray-type dishwashers.
NOTE: NSF certified residential dishwashers are not intended for licensed food establishments.
3. SMART DRY—When selected, sensors detect the presence of rinse aid and the final rinse
temperature. The drying heater and fan are then turned on for the minimum
time to achieve optimum drying results. This saves energy as compared to
conventional heated dry and saves time as compared to non-heated dry.
SMART DRY is not available on RINSE ONLY.
Control Panel — ZBD7000 & ZBD7100
Dishwasher
2 3 4