Table of Contents
Advertisement
DETAILED SETUP AND MOUNTING:
WIRELESS DISPLAY:
A/C ADAPTER USB PORT SD/MMC CARD SLOT
Main Power Source: Plug in the 5.0V adapter into the adapter socket of the weather station.
Note: Buttons on the wireless display respond the same as the buttons on the IR remote
control.
POWER: Turn on or off the unit
UP/DOWN ARROWS: Move up or down in the setup mode
LEFT/RIGHT ARROWS: Select photos or move left or right in the SETUP mode
ENTER: Enter the display mode or confirm setting in setup mode.
EXIT: Exit the current display mode.
Positioning the Wireless Display:
The Weather station provides the option of table standing or wall mounting the unit, vertically or
horizontally. Before wall mounting, please check that the outdoor data can be received from the
desired locations.
Hanging holes
Stand guides
BASE STAND
TO WALL MOUNT:
Fix a screw (not supplied) into the desired wall, leaving the head
extended out by about 0.2" (5mm).
Place the weather station onto the screw, using the hanging hole on the
backside. Gently pull the weather station down to lock the screw into
place.
TABLE STAND:
Insert the stand to the back of the wireless display. Place wireless display
on desk or table in range of the sensors.
Note: The display can stand vertical or horizontal by repositioning the
base stand.
POWER LIGHT
FUNCTION BUTTONS
P a g e
| 7
Advertisement
Table of Contents
