Table of Contents
Advertisement
VIEW DIFFERENT DISPLAY MODES:
On the IR remote control, use these buttons to switch between different display modes:
WEATHER
WEATHER & PHOTOS
PHOTOS
CALENDAR
NOTE: In Weather Mode and Weather & Photos Mode:
The indoor temperature/humidity will constantly switch with the outdoor temperature/humidity
readings.
The daily, weekly and monthly rain will continually switch but the total rain will remain constant.
This switching feature cannot be turned off.
WEATHER MODE:
1) Weather forecast – includes sunny, partly cloudy, cloudy, rainy & stormy
2) Pressure bar chart – shows pressure level & trend of the past 6 hours
3) Barometric pressure - pressure reading (refer SETUP mode for pressure unit setting)
4) Pressure trend – rising, steady or falling
5) Daily, weekly or monthly rainfall in inch or mm (switches continually)
6) Total Rainfall in inch or mm
7) Wind chill in degree F or C
8) Average wind speed in m/s, knots, mph & km/h
9) 16 resolution of average wind direction
10) Gust wind speed in m/s, knots, mph & km/h
11) Outdoor or indoor temperature in degree C or F (with trend – rising, steady or falling) (switches
continually)
12) Outdoor or indoor humidity (with trend – rising, steady or falling) (switches continually)
13) RF signal indicator – flashes when it is searching for RF signal from remote sensor; stays on when it
has successfully received RF signal from the remote sensor
14) Clock – displays in 24 or 12 hour format (refer "Time format" in SETUP mode for setting)
15) Alarm icon – appears when alarm is enabled
16) Moon phase with stars icons – New moon (the moon icon disappears), Waxing Crescent moon, First
Quarter Moon, Waxing gibbous moon, Full Moon, Waning gibbous Moon, Last Quarter Moon &
Waning Crescent Moon
17) Calendar – displays in Day/Month or Month/Day format (Refer SETUP mode for setting)
18) Channel number of outdoor remote sensor – channel 1, 2 or 3 (Default channel 1 for wind meter)
P a g e
| 20
Advertisement
Table of Contents
