INSTANT TRANSMISSION is the state-of-the-art new wireless transmission technology, exclusively designed and developed by La Crosse Technology®. INSTANT TRANSMISSION offers you an immediate update of all your outdoor data measured from the transmitters: follow your climatic variations in real-time!
FEATURES: WIRELESS DISPLAY Time display in 12/24 hour time format Manual set time and date. Time alarm. Calendar display (date, month, year) Moon phase with eight displays. Weather forecast with 5 weather icons (Sunny, partly cloudy. cloudy, rainy and stormy). ...
INITIAL QUICK SETUP: WIRELESS DISPLAY: Plug in the 5.0V adapter into the adapter socket on the right side of the weather station to power up the photo frame weather station. IR REMOTE CONTROL: Pull out the battery insulation sheet from the bottom of the IR remote control to activate. PHOTOS: ...
DETAILED SETUP AND MOUNTING: WIRELESS DISPLAY: A/C ADAPTER USB PORT SD/MMC CARD SLOT BASE STAND POWER LIGHT FUNCTION BUTTONS Main Power Source: Plug in the 5.0V adapter into the adapter socket of the weather station. Note: Buttons on the wireless display respond the same as the buttons on the IR remote control.
IR REMOTE CONTROL: Battery: A (CR2025) battery is included in the IR remote control. Initial setup: pull out the battery insulation sheet from the bottom of the IR remote control. Replace the battery: Follow the instructions on the back of the IR remote control l to pull out the battery door.
WIND/THERMO-HYGRO SENSOR Positioning the wind/thermohygro sensor: Place the Wind/Thermohygro sensor as high as you can install it. Generally, 6 ft. above the peak of the roof (or more) is required for accurate readings. Since this sensor requires batteries to provide power, you may need it more accessible then a traditional roof mount would allow.
Page 10
Calibrate wind direction & install batteries: Calibrating the wind direction after mounting the wind/thermohygro sensor allows flexibility in mounting locations. Be sure batteries have been removed from the wind/thermohygro sensor before the calibration. NOTE: The same calibration is required for the initial set up and for every battery replacement. ...
RAIN GAUGE Battery Installation for the rain gauge: Press the tabs back as indicated below to unlock the rain gauge cover. BATTERY COVER Lift the rain gauge cover off its base. Then carefully remove the packing tape from the rocker assembly.
Page 12
Use a pencil to trace the inside of the mounting holes on the base of the rain gauge to mark the screw locations. Drill a hole in the center of each marked location and insert the supplied plastic screw plugs ...
DISPLAY MODES: There are 5 display modes in the menu selection. Use the EXIT button on the wireless display or on the IR remote control to access the menu selection. Press LEFT ARROW button or RIGHT ARROW button to select a display mode, and then press ENTER to view the selected display mode. NOTE: The SETUP icon is on the second page of the screen.
Page 14
Contrast: Select the contrast of the display from level 1 to 16 Saturation: Select the saturation of the display from level 1 to 16 Radio-Controlled Reception: (This function is not available for this unit. Please keep this setting to “Off”) Time Zone: (This function is not available for this unit.
DETAILED SETUP MENU: LANGUAGE: On the remote control, press the SETUP button to enter the set up menu. Use the arrows to scroll down the first screen to Language. Use the RIGHT ARROW button to select English, French or German. Press ENTER to confirm the setting.
MINUTES: Use the RIGHT ARROW button to move to the Minutes. Use the UP/DOWN ARROW button to select the Minutes. Press the ENTER button to confirm the settings. OFF/ON: Use the RIGHT ARROW button to move to the Alarm OFF/ON. Use the RIGHT ARROW button to ENALBE or DISABLE.
CALENDAR DISPLAY FORMAT: On the remote control, press the SETUP button to enter the set up menu. Use the arrows to scroll down the second screen to Calendar Display Format. Use the RIGHT ARROW button to change from Month/Day format to Day/Month format. Press the ENTER button to confirm the setting. TIME FORMAT: On the remote control, press the SETUP button to enter the set up menu.
RAINFALL UNIT: On the remote control, press the SETUP button to enter the set up menu. Use the arrows to scroll down the third screen to Rainfall Unit of measurement. Use the RIGHT ARROW button to choose from mm or inches.
REMOTE CHANNEL DISPLAY: This station has the option of adding two additional thermohygro sensors model W186-Q, 915MHz, for temperature/humidity readings in different locations. Extra sensors may not be available at this time. On the remote control, press the SETUP button to enter the set up menu. Use the arrows to scroll down the third screen to Remote Channel Display.
VIEW DIFFERENT DISPLAY MODES: On the IR remote control, use these buttons to switch between different display modes: WEATHER WEATHER & PHOTOS PHOTOS CALENDAR NOTE: In Weather Mode and Weather & Photos Mode: The indoor temperature/humidity will constantly switch with the outdoor temperature/humidity readings.
WEATHER AND PHOTO MOD E: 1) Clock – displays in 24 or 12 hour format (refer “Time format” in SETUP mode for setting) 2) Alarm icon – appears when alarm is enabled 3) Weather forecast – includes sunny, partly cloudy, cloudy, rainy & stormy 4) Daily, weekly &...
PHOTO MODE: MEMORY CARD PORT USB PORT Save photos (JPEG format) into your memory device (USB memory stick, SD or MMC card) and insert into the connector on the side of the wireless display when the unit is off. Turn on the wireless display and enter PHOTO mode to view the photos.
WEATHER FORECAST ICONS: The unit predicts weather condition of the next 12 – 24 hours based on the change of atmospheric pressure. The weather forecast is based on atmospheric pressure change and is about 70-75% correct. As weather conditions cannot be 100% correctly forecasted we cannot be responsible for any loss caused by an incorrect forecast.
SPECIFICATIONS: WIRELESS DISPLAY: Memory: Supports USB flash drive (up to 32GB), SD & MMC cards (up to 32GB) Photo format: Supports JPEG format OUTDOOR DATA RECEPTION: Wind/Temperature/Humidity data around 23 seconds Rain data around 23 seconds INDOOR TEMPERATURE: Range: +32 F to +122 F 0 C to + 50 C (Shows LL when below 0C or 32F;...
RAINFALL: Range: 0 – 393.66 inch 0 – 9999 mm Transmission Distance: 131 feet (40 meters) to wireless display monitor in open air with no obstructions. The daily, weekly, monthly or total rainfall measurement is displayed in the lower portion of the LCD, in the unit of inch or mm.
TROUBLESHOOTING: In case of power outage, the unit will shut off completely and the synchronization of RF remote sensors will be lost. You are required to set up the remote sensor & weather forecast again following the procedures in the manual. ...
LIABILITY DISCLAIMER: The electrical and electronic wastes contain hazardous substances. Disposal of electronic waste in wild country and/or in unauthorized grounds strongly damages the environment. Please contact your local or/and regional authorities to retrieve the addresses of legal dumping grounds with selective collection.
La Crosse Technology, Ltd or La Crosse Technology, Ltd’s authorized service center. La Crosse Technology, Ltd will repair or replace this product, at our option and at no charge as stipulated herein, with new or reconditioned parts or products if found to be defective during the limited warranty period specified above.