Dome Cover - Toshiba IK-WR14A Quick Start Manual And Important Safeguards

Dome cover

1. Attach the dome cover to the camera and aligning with the mounting holes.
2. You will find a silica gel bag attached to the dome cover.
Remove the supplied silica gel from the aluminum foil bag, and replace it to new silica
gel with supplied double-sided tape.
(Please replace the silica gel with a new one if you open the dome cover after
installation.)
3. Secure the four dome screws with the supplied torx wrench. Make sure all parts of
the camera are securely installed.
1
2
The supplied torx wrench is exclusively designed to match the dome screws. Do not
discard the torx wrench.
Treat silica gel bag with care. Do not tear the silica gel packge.
WARNING:
Keep the silica gel out of the reach of babies, infants, and children.
DO NOT EAT, HARMFUL IF SWALLOWED
22 22
3
3