Table of Contents
Advertisement
General Connection (without PoE)
1. Connect the camera to an Ethernet switch via LAN cable.
2. Connect the power cable from a power unit (not supplied) to the appropriate port of
the general I/O terminal.
(See page 12).
3. Connect the PC to an Ethernet switch via Ethernet cable.
1
CAUTION
l Recommended power cord is twisted pair line with a minimum wire size of 18 AWG.
l The recommended power supply for this camera is 12 watts minimum.
l When PoE is connected, don't supply AC24V or DC12V from the I/O
terminal.
l Never input AC24V and DC12V at the same time.
18
18
18
Ethernet switch
(not supplied)
2
AC24V or DC12V adapter
UL Listed Class 2 power supply (not supplied)
3
Client PC
(not supplied)
AC 120V
Advertisement
Table of Contents
