Lincoln 2013 MKX Owner's Manual page 40

40
Deactivating and Activating the Belt-Minder Feature
WARNING: While the system allows you to deactivate it, this
system is designed to improve your chances of being safely
belted and surviving an accident. We recommend you leave the system
activated for yourself and others who may use the vehicle. To reduce
the risk of injury, do not deactivate/activate the system while driving
the vehicle.
Note: The driver and front passenger warning are deactivated and
activated independently. When deactivating or activating one seating
position, do not buckle the other position as this will terminate the
process.
Read Steps 1 - 4 thoroughly before proceeding with the deactivation
and activation programming procedure.
Before following the procedure, make sure that:
• The parking brake is set
• The gearshift is in position P
• The ignition is off
• The driver and front passenger safety belts are unbuckled
The system can be deactivated or activated by performing the following
procedure:
1. Turn the ignition on. DO NOT START THE ENGINE.
2. Wait until the safety belt warning light turns off (approximately
1–2 minutes).
• Step 3 must be completed within 50 seconds after the safety belt
warning light turns off.
3. For the seating position being disabled, buckle then unbuckle the
safety belt three times at a moderate speed, ending in the unbuckled
state.
• After Step 3, the safety belt warning light will be turned on for three
seconds.
2013 MKX (mkx)
Owners Guide gf, 2nd Printing
USA (fus)
Safety Belts