Using Add-On-Module; Appendix 1 - Samsung NX Series Operating Manual

∫ªπÆ 1999.9.15 12:32 PM ∆‰¿Ã¡ˆ39
number or trunk group number and the station number and station
passcode. After hearing the dial tone, make the outside call.
Using Add-On Module
NX-series' unique Add-On Module (AOM) adds to the capability of any
station. Its 24 programmable buttons can be used as feature keys, DSS/BLF
keys, or one-touch Speed-Dial buttons.
1. Connect the Add-On-Module (AOM) to the keyset port.
2. Using MMC 37, set the AOM master.
3. Program the keys with MMC 71 SYSTEM KEY PROGRAMMING.
(Refer to the Technical manual)

APPENDIX 1

ACC Account code
ALM Set Alarm
AMD Answer Mode
ARD Auto Redial
BRG Barge-In
CBK Callback
CMP Camp-on
CNF Conference
DND Do Not Disturb
DOR Door
DPC Direct Pickup
EXC Boss/Secretary
FAT Forced Auto Answer
FLS Flash
FWA Call Forward All
FWB Call Forward Busy
FWN Call Forward No answer
Keyset users may customize programmable keys using
system programming.
The following are programmable feature keys:
SPECIAL FEATURES
GPC Group Pickup
HED Headset mode
IOG Group In/Out
LNR Last Number Redial
MPG Meet Me Page
MSG Message
MUT Mute
NIT Night mode
OPR Operator group
PAG Page
PSE Pause Dialing
SNR Saved Number Redial
SPD Speed-Dialing
TMR Timer
TRN Transfer
UPC UNA Pickup
VAC Vacant Message
37