Cisco ASR 903 Manual page 84

▀ Structure-Agnostic TDM over Packet (SAToP)
Targeted Hello: 172.16.2.2(LDP Id) -> 172.16.3.3, LDP is UP
Graceful restart: not configured and not enabled
Non stop routing: not configured and not enabled
Status TLV support (local/remote)
LDP route watch
Label/status state machine
Last local dataplane
Last BFD dataplane
Last BFD peer monitor
Last local AC
Last local AC
Last local PW i/f circ status rcvd: No fault
Last local LDP TLV
Last remote LDP TLV
Last remote LDP ADJ
MPLS VC labels: local 24, remote 22
Group ID: local 0, remote 0
MTU: local 0, remote 0
Remote interface description:
Sequencing: receive disabled, send disabled
Control Word: On (configured: autosense)
SSO Descriptor: 172.16.3.3/1001, local label: 24
Dataplane:
SSM segment/switch IDs: 4098/8193 (used), PWID: 2
VC statistics:
transit packet totals: receive 3243829, send 3455361
transit byte totals:
transit packet drops:
ASR903-R2# show controllers e1 0/5/0 brief
E1 0/5/0 is up.
Applique type is A900-IMA16D
Cablelength is Unknown
No alarms detected.
alarm-trigger is not set
Framing is unframed, Line Code is HDB3, Clock Source is Line.
Data in current interval (340 seconds elapsed):
0 Line Code Violations, 0 Path Code Violations
0 Slip Secs, 0 Fr Loss Secs, 0 Line Err Secs, 0 Degraded Mins
0 Errored Secs, 0 Bursty Err Secs, 0 Severely Err Secs, 0 Unavail Secs
0 Near-end path failures, 0 Far-end path failures, 0 SEF/AIS Secs
Total Data (last 24 hours)
0 Line Code Violations, 0 Path Code Violations,
0 Slip Secs, 0 Fr Loss Secs, 0 Line Err Secs, 0 Degraded Mins,
0 Errored Secs, 0 Bursty Err Secs, 0 Severely Err Secs, 0 Unavail Secs
0 Near-end path failures, 0 Far-end path failures, 0 SEF/AIS Secs
▄ Cisco ASR 903 Router Design and Deployment Guide
84
: enabled/supported
: enabled
: established, LruRru
status rcvd: No fault
status rcvd: Not sent
status rcvd: No fault
circuit status rcvd: No fault
circuit status sent: No fault
status sent: No fault
status rcvd: No fault
status rcvd: No fault
receive 882321488, send 912215304
receive 0, seq error 0, send 0
TDM
OL-30526-01