Image Is Distorted Or Blurry; Image Colors Are Patchy At The Edges; Image Is Too Dark; Back Of Original Image Appears In Scanned Image - Epson Perfection V550 Photo User Manual

Image is Distorted or Blurry

If a scanned image appears distorted or blurry, try these solutions:
• Make sure your original is not wrinkled or warped. This may prevent the original from laying flat on the
scanner glass.
• Do not move your original or your product during scanning.
• Your product will not operate properly while tilted at an angle. Place it on a flat, stable surface that
extends beyond the base of the product in all directions.
• Adjust these Epson Scan settings (if available) and try scanning again:
• Select the Unsharp Mask setting.
• Adjust the Auto Exposure setting.
• Increase the Resolution setting.
Parent topic:

Image Colors are Patchy at the Edges

If you are scanning a thick or warped original, cover its edges with paper to block external light as you
scan it.
Parent topic:

Image is Too Dark

If your scanned image is too dark, try these solutions:
• Adjust these Epson Scan settings (if available) and try scanning again:
• Auto Exposure
• Brightness
• Histogram Adjustment
• Check the brightness and contrast settings of your computer monitor.
Parent topic:

Back of Original Image Appears in Scanned Image

If an image from the back of a thin original appears in your scanned image, place a piece of black paper
on the back of the original and scan it again.
Parent topic:
Solving Scanned Image Quality Problems
Solving Scanned Image Quality Problems
Solving Scanned Image Quality Problems
Solving Scanned Image Quality Problems
103