Line Of Dots Appears In All Scanned Images; Straight Lines In An Image Appear Crooked; Image Is Distorted Or Blurry - Epson DS-1630 User Manual

Related topics
Placing Originals on the Scanner

Line of Dots Appears in All Scanned Images

If a line of dots appears in all your scanned images, try these solutions:
• Clean the scanner glass with a soft, dry, lint-free cloth or use a small amount of glass cleaner on the
cloth, if necessary. Paper towels are not recommended.
Caution: Do not spray glass cleaner directly on the scanner glass.
• Make sure any interface cables are securely connected at both ends.
Parent topic:
Related tasks
Cleaning Your Scanner

Straight Lines in an Image Appear Crooked

If straight lines in an original appear crooked in a scanned image, make sure to place your original
straight when you scan it.
Parent topic:
Related tasks
Cleaning the ADF
Related topics
Placing Originals on the Scanner

Image is Distorted or Blurry

If a scanned image appears distorted or blurry, try these solutions:
• Make sure your original is not wrinkled or warped. This may prevent the original from laying flat on the
scanner glass.
• Do not move your original or your product during scanning.
• Your product will not operate properly while tilted at an angle. Place your product on a flat, stable
surface that extends beyond its base in all directions.
Solving Scanned Image Quality Problems
Solving Scanned Image Quality Problems
93