Table of Contents
Advertisement
Crestron TMK-12L & WMKT-12L
Trim Ring Mount Kits:
TMK-12L & WMKT-12L
Description
Installation Guide – DOC. 6360A
Trim Ring Mount Kits are the preferred method of mounting the Crestron Isys
TPS-12L, TPS-12G-QM-L wall mount touchpanels, and the Isys i/O TPMC-12L
wall mount touchpanel media center when a finished appearance within a neatly
trimmed cutout is required. This application is perfect for wallpapering.
NOTE: If mounting into a material other than drywall (for example, wood lectern,
concrete, or rock) use the cutout template, available in the post-construction kit
WMKT-12L. For concrete and rock mounting material, allow for proper ventilation
before mounting the touchpanel.
There are two Trim Ring Mount Kits. The TMK-12L is a pre-construction accessory.
Pre-construction refers to framed walls prior to hanging drywall. This accessory
must be used with either the Pre-Construction Mount Kit (PMK-12L) or Wall Mount
Back Box Kit (BB-12L).
The WMKT-12L is a post-construction kit. Post-construction refers to framed walls
with drywall hung. This accessory is designed with a mounting plate so that it can be
placed anywhere on a wall without the support of a stud. The mounting plate is also
ideal for installing the touchpanel in a lectern.
NOTE: If necessary, consult the latest revision of the TPS-12L/15L/17L Operations
Guide (Doc. 6355), TPS-12G/15G/17G-QM-L Operations Guide (Doc. 6356) or the
TPMC-12L Operations Guide (Doc. 6686) for a complete list of mounting options.
These documents are available from the Crestron website
(www.crestron.com/manuals).
Trim Ring Mount Kits
Trim Ring Mount Kits: TMK-12L & WMKT-12L • 1
®
Advertisement
Table of Contents
