Crestron TMK-12L Installation Manual
Crestron TMK-12L Installation Manual

Crestron TMK-12L Installation Manual

Trim ring mount kits
Hide thumbs Also See for TMK-12L:

Advertisement

Quick Links

Crestron TMK-12L & WMKT-12L
Trim Ring Mount Kits
Installation Guide

Advertisement

Table of Contents
loading

Summary of Contents for Crestron TMK-12L

  • Page 1 Crestron TMK-12L & WMKT-12L Trim Ring Mount Kits Installation Guide...
  • Page 2 This document was prepared and written by the Technical Documentation department at: Crestron Electronics, Inc. 15 Volvo Drive Rockleigh, NJ 07647 1-888-CRESTRON All brand names, product names and trademarks are the property of their respective owners. ©2009 Crestron Electronics, Inc.
  • Page 3: Table Of Contents

    Crestron TMK-12L & WMKT-12L Trim Ring Mount Kits Contents Trim Ring Mount Kits: TMK-12L & WMKT-12L Description..........................1 Setup ............................2 Supplied Hardware ...................... 2 Installation ........................4 Resources..........................10 Industry Compliance ....................10 Reference Documents....................10 Further Inquiries ......................10 Future Updates ......................
  • Page 5: Trim Ring Mount Kits: Tmk-12L & Wmkt-12L

    WMKT-12L. For concrete and rock mounting material, allow for proper ventilation before mounting the touchpanel. There are two Trim Ring Mount Kits. The TMK-12L is a pre-construction accessory. Pre-construction refers to framed walls prior to hanging drywall. This accessory must be used with either the Pre-Construction Mount Kit (PMK-12L) or Wall Mount Back Box Kit (BB-12L).
  • Page 6: Setup

    Setup Supplied Hardware The TMK-12L consists of a metal trim ring that attaches to the BB-12L or PMK-12L. The WMKT-12L consists of the trim ring found in the TMK-12L as well as a mounting plate, and a cutout template set.
  • Page 7 (274 mm) 1/8 in 6 1/4 in (3 mm) (158 mm) 11 1/4 in (286 mm) 11.00 in (279 mm) 1 1/16 in (27 mm) .188 TYP Trim Ring Mount Kits: TMK-12L & WMKT-12L • 3 Installation Guide – DOC. 6360A...
  • Page 8: Installation

    6. Be sure to review each procedure before starting. TMK-12L Procedure This section provides the necessary steps for the assembly of the TMK-12L with either the BB-12L or PMK-12L. It is assumed that the BB-12L or PMK-12L has been secured to the stud according to the instructions in the latest revisions of their Installation Guides (Doc.
  • Page 9 TPS-12G/15G/17G-QM-L Operations Guide (Doc. 6356) or the TPMC-12L Operations Guide (Doc. 6686) for touchpanel installation details. Refer also to the comprehensive illustration shown on the following page. Trim Ring Mount Kits: TMK-12L & WMKT-12L • 5 Installation Guide – DOC. 6360A...
  • Page 10 Crestron Mud Mount Kit, MMK-12L. Together with the mounting plate supplied with the WMKT-12L, it provides a cost-effective means of correction. Essentially, the combination of these two kits makes up the Crestron Mud Mount Kit for the wall, WMKM-12L. Simply follow the “WMKM-12L Procedure” in the latest revision of the Mud Mount Kits Installation Guide (Doc.
  • Page 11 (approximately 90 degrees). Refer to the illustration on the following page. NOTE: The mounting plate will have a slight play; this is normal. It allows for minor adjustments to the touchpanel during installation. Trim Ring Mount Kits: TMK-12L & WMKT-12L • 7 Installation Guide – DOC. 6360A...
  • Page 12 Operations Guide (Doc. 6355), TPS-12G/15G/17G-QM-L Operations Guide (Doc. 6356) or the TPMC-12L Operations Guide (Doc. 6686) for details. Refer also to the comprehensive illustration on the following page. 8 • Trim Ring Mount Kits: TMK-12L & WMKT-12L Installation Guide – DOC. 6360A...
  • Page 13 TPS-12L Mounting Using WMKT-12L – Exploded View MOUNTING PLATE (2012963) DRYWALL TRIM RING (2013001) TPS-12L (Bezel removed) NOTE: MOUNTING SCREWS SUPPLIED WITH TOUCHPANEL. MOUNTING SCREWS (8) #06-32 1-1/2" (2007254) (Bezel) Trim Ring Mount Kits: TMK-12L & WMKT-12L • 9 Installation Guide – DOC. 6360A...
  • Page 14: Resources

    Crestron TMK-12L & WMKT-12L Resources Industry Compliance As of the date of manufacture, the TMK-12L and WMKT-12L have been tested and found to comply with specifications for CE marking. Reference Documents The latest version of all documents mentioned within the guide can be obtained from the Crestron website (www.crestron.com/manuals).
  • Page 15: Return And Warranty Policies

    Purchasers should inquire of the dealer regarding the nature and extent of the dealer's warranty, if any. CRESTRON shall not be liable to honor the terms of this warranty if the product has been used in any application other than that for which it was intended or if it has been subjected to misuse, accidental damage, modification or improper installation procedures.
  • Page 16 Crestron Electronics, Inc. Installation Guide – DOC. 6360A 15 Volvo Drive Rockleigh, NJ 07647 (2013443) Tel: 888.CRESTRON 03.09 Fax: 201.767.7576 Specifications subject to www.crestron.com change without notice.

This manual is also suitable for:

Wmkt-12l

Table of Contents