Input And Output Connectors - Lab.gruppen FP14000 Operation Manual

QUICK GUIDE OVERVIEW 6

6.2.3 Input and Output connectors

All FP+ Series amplifiers are equipped with balanced XLR-F input connectors. two-channel models also offer
parallel ("loop-thru") XLR-M output connectors for daisy-chaining multiple amplifiers from the same signal
source.
All FP+ Series amplifiers except the FP 9000, FP 13000 and FP 14000 offer a choice of either binding post
(BP) or Neutrik© NL4FC Speakon output connectors (SP). The FP 9000, FP 13000 and FP 14000 are offered
with BP connectors only as the potential maximum output current exceeds the recommended limits for the
Speakon connectors.
For specific configuration and wiring information, see section 7.4.
Figure 6.2.3a: Two- and four-channel input connector configurations
Audio inputs - four-channel models Audio inputs and loop-thru connectors -
two-channel models
Figure 6.2.3b: Two- and four-channel speaker output configurations
Speakon outputs - two-channel models Binding Posts - two-channel models
Speakon outputs - four-channel models
Binding Post outputs - four-channel model
FP+ Series Operation Manual 13