Wiring Connection - Kenwood KDC-U553BT Instruction Manual

Wiring connection

USB connector
AUX input (Stereo)
Use the mini-plug (3.5 mm) cable which
is stereo type and does not have any
resistance.
Fuse (10A)
Wiring harness D
White
White/Black
Gray
Gray/Black
Green
Green/Black
Purple
Purple/Black
If no connections are made, do not let the wire come out from the tab.
Blue
(Antenna control wire)
Blue/White
(Power control wire)
Brown
(Mute control wire)
Light Blue/Yellow
(Steering remote control
wire)
Red (Ignition wire)
Yellow (Battery wire)
Black (Ground wire)
To the metallic body or chassis of the car
26
English
R
To front left speaker
To front right speaker
To rear left speaker
To rear right speaker
Depending on what antenna you are using, connect
either to the control terminal of the motor antenna, or
ANT. CONT
to the power terminal for the booster amplifier of the
film-type or short pole type antenna.
When using the optional power amplifier, connect to
P.CONT
its power control terminal. (Max. 300mA, 12V)
To connect the Kenwood navigation system, consult
MUTE
your navigation manual.
To use the steering wheel remote control feature, you
need to an exclusive remote adapter (not supplied)
REMOTE CONT
matches your car is required.
STEERING WHEEL
REMOTE INPUT
Car fuse box
ACC
FM/AM antenna
input (JASO)
Rear output
L
Front output
Sub Woofer output
Ignition key switch
Car fuse box
(Main fuse)
+
–
Battery
Antenna Cord