Lincoln MKT Owner's Manual page 311

Replacing license plate lamp bulbs
1. Make sure the headlamp switch is in the off position.
Install new bulb(s) in reverse order.
BULB SPECIFICATION CHART
Replacement bulbs are specified in the chart below. Headlamp bulbs
must be marked with an authorized "D.O.T." for North America and an
"E" for Europe to ensure lamp performance, light brightness and pattern
and safe visibility. The correct bulbs will not damage the lamp assembly
or void the lamp assembly warranty and will provide quality bulb burn
time.
Function
*Headlamp
*Front sidemarker lamp
*Front parking lamp
*Front turn lamp
Fog lamp
*Tail/brake/turn signal
lamp
*Rear sidemarker
*Backup lamp
License plate lamp
2013 MKT (mkt)
Owners Guide gf, 2nd Printing
USA (fus)
Maintenance
2. Remove the two screws and the
license plate lamp assembly from the
liftgate.
3. Carefully pull the bulb straight out
from the lamp assembly.
Number of Bulbs
2
N/A
N/A
2
2
N/A
N/A
N/A
2
311
Trade
Number
D3S (HID)
LED
LED
PY24W SV+
H11
LED
LED
LED
C5WL