Lincoln MKT Owner's Manual page 225

System Settings
The system has one standard feature setting and two optional setting
menus available. To view or adjust them, select Settings > Vehicle Settings
> Driver Assist > Lane Keeping Sys in the left-hand instrument cluster
display using the OK button on the steering wheel. The last-known
selection for each of these settings is stored by the system. You do not
need to readjust your settings each time you turn on the system.
Mode: This setting allows the driver to select which of the system
features will be enabled and turned on when the button is pressed.
Note: Some vehicle are only equipped with the alert function only.
• Alert only – Provides a steering wheel vibration when an unintended
lane departure is detected.
• Aid only (if equipped) – Provides a steering input toward the lane
center when an unintended lane departure is detected.
• Alert + Aid (if equipped)
Sensitivity: This setting affects where in the lane a warning is provided
(e.g. the increased sensitivity setting will move the warning zones in
closer). This setting does not impact the aid mode.
• Normal
• Increased
Intensity (if equipped): This setting affects the intensity of the
steering wheel vibration used for the alert mode. This setting does not
impact the aid mode.
• Low
• Medium
• High
System Display
When the system is turned on, an overhead graphic of a vehicle
with lane markings will be displayed in the left-hand instrument
cluster display. If the aid mode is selected when the system is
turned on, a separate white icon will also appear in the instrument cluster.
When the system is turned off, the lane marking graphics will not be
displayed.
Note: The overhead vehicle graphic may still be displayed if adaptive
cruise control is enabled.
2013 MKT (mkt)
Owners Guide gf, 2nd Printing
USA (fus)
Driving Aids 225