Keyless Starting - Lincoln MKT Owner's Manual

Starting and Stopping the Engine

KEYLESS STARTING

WARNING: The keyless starting system may not function if the
key is close to metal objects or electronic devices such as mobile
phones.
Note: A valid passive key must be located inside the vehicle to switch
the ignition on and start the engine.
To turn the ignition on, press the start button once. It
is located on the instrument panel to the right of the
ENGINE
steering wheel. All electrical circuits and accessories
are operational, and warning lamps and indicators will
START
illuminate.
STOP
To start the vehicle, do the following:
1. Make sure the transmission is in P (Park).
2. Fully press the brake pedal.
3. Press the start button. The engine may continue cranking for up to
10 seconds or until the vehicle starts.
To turn the ignition off, press the start button when the vehicle is on or
the engine is running.
The passive starting system will not function if:
• the passive key frequencies are jammed.
• the passive key battery is dead.
If you are unable to start your vehicle, do the following.
2. With the passive key in this position, you can use the start button to
switch the ignition on and start your vehicle.
2013 MKT (mkt)
Owners Guide gf, 2nd Printing
USA (fus)
1. Insert the passive key into the
key holder located in the rear of the
center console utility compartment.
Insert the key into the slot with the
buttons facing out and with key ring
up.
173