HP ProLiant DL320e Specification page 20

QuickSpecs
Configuration Information - Factory Integrated Models
HP Power Supplies
Step 3: Choose Additional Factory Integratable Options
HP USB Kit
HP Rail Kits
this document.
NOTE: For more information on ProLiant Energy Efficient Features, see:
www.hp.com/go/proliant-energy-efficient
NOTE: PC3L is a low voltage memory.
NOTE: Prior to making a power supply selection it is highly recommended that the HP
Power Advisor is run to determine the right size power supply for your server
configuration. The HP Power Advisor is located at: www.hp.com/go/hppoweradvisor.
HP 350W 1U Factory Integrated Power Supply Kit
NOTE: The 350 Watts Power Supply is rated at 85% efficiency.
HP Common Slot Platinum Plus Power Supply Kits
NOTE: The following Power Supplies offer 94% efficiency with support for Intelligent
Power Discovery.
HP 460W Common Slot Platinum Plus Hot Plug Power Supply Kit
HP Common Slot Gold Power Supplies
NOTE: The following Power Supplies offer 92% efficiency.
HP 460W Common Slot Gold Hot Plug Power Supply Kit
HP DL320e Gen8 Factory Integrated RPS Enablement Kit
NOTE: When selecting Common Slot power supply options for the DL320e Gen8 server,
a HP DL320e Gen8 RPS Enablement FIO Kit (675451-B21) is required for HP common
slot redundant power supply configurations.
NOTE: Option Kits for AC power supplies include the power supply and one PDU IEC
cable.
NOTE: HP ProLiant servers ship with an IEC-IEC power cord used for rack mounting with
Power Distribution Units (PDUs). For a full list of optional HP power cords please go to
www.hp.com/products/powercords
NOTE: Power Specification and Technical Content for supported power supplies can be
found at:
http://h18000.www1.hp.com/products/quickspecs/14209_div/14209_div.html
HP Gen8 FIO Internal USB Kit
NOTE: Gen8 rail kits have changed significantly from prior generation rail kits. Please
take a moment to review the installation documentation that comes with the server to
help you with the installation of your Gen8 server.
NOTE: Rail kits are optional for Gen8 and are no longer included standard with the
server. Customers have the option to purchase their server without a rail kit.
CAUTION: HP recommends that at least two people are used for all rack server
installations. Please refer to your installation instructions for proper tools and number
of people to use for any installation.
HP 1U FIO Friction Rail Kit
NOTE: Kit contains non-telescoping friction rails which do not allow for in rack
serviceability. The HP 1U Gen8 Cable Management Arm is not available when using
Friction Rails. Caution: HP recommends that a minimum of two people is required for all
Rack Server installations. Please refer to your installation instructions for proper tools
DA - 14326 Worldwide — Version 21 — December 13, 2013
HP ProLiant DL320e Generation 8 (Gen8)
675450-B21
656362-B21
503296-B21
675451-B21
662961-B21
663200-B21
Page 20