Table of Contents
Advertisement
N750 Wireless Dual Band Gigabit ADSL Modem Router DGND4000
Use NETGEAR genie after Installation
When you first set up your wireless modem router, NETGEAR genie automatically starts
when you launch an Internet browser on a computer that is connected to the wireless modem
router. You can use NETGEAR genie again if you want to view or change settings for the
wireless modem router.
1.
Launch your browser from a computer or wireless device that is connected to the
wireless modem router.
2.
Type http://www.routerlogin.net or http://www.routerlogin.com.
3.
Enter admin for the wireless modem router user name and password for the wireless
modem router password, both in lowercase letters.
Note:
The wireless modem router user name and password are different
from the user name and password for logging in to your Internet
connection. See
information.
Upgrade Wireless Modem Router Firmware
When you set up your wireless modem router and are connected to the Internet, the wireless
modem router automatically checks for you to see if newer firmware is available. If it is, a
message is displayed on the top of the screen. See
Firmware
on page 84 for more information about upgrading firmware.
Click the message when it shows up, and click Yes to upgrade the wireless modem router
with the latest firmware. After the upgrade, the wireless modem router restarts.
CAUTION:
Do not try to go online, turn off the wireless modem router, shut down the
computer, or do anything else to the wireless modem router until the
wireless modem router finishes restarting and the Power LED has stopped
blinking for several seconds.
admin
********
Types of Logins and Access
Get Started with NETGEAR genie
on page 22 for more
Upgrade the Wireless Modem Router
24
Advertisement
Table of Contents
