Remote Management - NETGEAR N750 DGND4000 User Manual

N750 wireless dual band gigabit dsl modem router—premium edition
Table of Contents

Advertisement

N750 Wireless Dual Band Gigabit ADSL Modem Router DGND4000

Remote Management

The remote management feature lets you upgrade or check the status of your N750 Modem
Router over the Internet.
To set up remote management:
1.
Select ADVANCED > Advanced Setup > Remote Management.
Note:
Be sure to change the wireless modem router's default login password
to a very secure password. The ideal password should contain no dictionary
words from any language and contain uppercase and lowercase letters,
numbers, and symbols. It can be up to 30 characters.
2.
Select the Turn Remote Management On check box.
3.
Under Allow Remote Access By, specify the external IP addresses to be allowed to access
the wireless modem router's remote web management interface.
Note:
For enhanced security, restrict access to as few external IP addresses
as practical.
To allow access from a single IP address on the Internet, select Only This Computer.
Enter the IP address that is allowed access.
To allow access from a range of IP addresses on the Internet, select IP Address
Range. Enter a beginning and ending IP address to define the allowed range.
To allow access from any IP address on the Internet, select Everyone.
4.
Specify the port number for accessing the web management interface.
Advanced Settings
122

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dgnd4000

Table of Contents