Add A Custom Service; Edit Or Delete A Port Forwarding Entry - NETGEAR N750 DGND4000 User Manual

N750 Wireless Dual Band Gigabit ADSL Modem Router DGND4000

Add a Custom Service

To define a service, game, or application that does not appear in the Service Name list, you
have to first determine which port number or range of numbers is used by the application.
You can usually determine this information by contacting the publisher of the application or
user groups or newsgroups.
To add a custom service:

1. Select ADVANCED > Advanced Setup > Port Forwarding/Port Triggering.
2. Select Port Forwarding as the service type.
3. Click the Add Custom Service button.
4. In the Name field, enter a descriptive name.
5. In the Type list, select the protocol. If you are unsure, select TCP/UDP.
6. In the Start Port field, enter the beginning port number.
• If the application uses a single port, enter the same port number in the End Port field.
• If the application uses a range of ports, enter the ending port number of the range in
the End Port field.
7. Click Apply. The service appears in the list in the Port Forwarding/Port Triggering screen.

Edit or Delete a Port Forwarding Entry

To edit or delete a port forwarding entry:

1. Select ADVANCED > Advanced Setup > Port Forwarding/Port Triggering.
2. In the table, select the radio button next to the service name.
3. Click Edit Service or Delete Service.
Advanced Settings
115