Sony DCR-TRV8 Service Manual page 51

2-10.MS SHASSIS, CONTROL SWITCH BLOCK (PS-4550)
Note for installing the operation switch block (PS-4550)
When installing the operation switch block (PS-4550),
align the switch of the area A with the power button
on the cabinet (L) side.
Area A
2-11.CK-84 BOARD, SPEAKER
5 Control switch block (CF-4550)
CN8605 6P (CK-84 board)
8 Two tapping screws
(M1.7 3.5)
4 Speaker (SP901)
2 Speaker retainer
assembly
1 Three tapping screws
(M1.7 3.5)
3 Harnss (SC-115)
CN8607 2P (CK-84 board)
2 Memory stick assembly
6 Harness (PC-111)
CN8603 14P (CK-84 board)
9 CK-84 board
2-6
4 Control switch block (PS-4550)
NOTE: 1 and 2 are only in the TRV10/TRV10E.
7 Harness (PC-112)
CN8604 13P (CK-84 board)
Note for installing the CK-84 board
Align the START/STOP MODE switch (S8613)
and the MANUAL FOCUS switch (S8614) with
their respective knobs.
3 Two tapping screws
(M1.7 3.5)
1 Screw (M1.7
2.5)