HP ProLiant DL160 Quickspecs page 24

QuickSpecs
Configuration Information - Factory Integrated Models
Step 3: Choose Additional Factory Integratable Options
HP Insight Software
Converged Infrastructure
Management Software
HP Optical Drives
HP USB and SD Options
HP Rack Options
Step 4: Choose Additional Options for Factory Integration
NOTE: For additional "Core Options" and "Additional Options", please refer to the "Options" section below.
NOTE: Common Slot power supply is mandatory with 10Gigabit FlexibleLOM.
NOTE: Power Specification and Technical Content for supported power supplies can be
found at:
http://h18000.www1.hp.com/products/quickspecs/14209_div/14209_div.html
HP Insight Control including 1yr 24x7 Support ProLiant ML/DL/BL-bundle Single Server
FIO License
HP OneView with iLO Advanced - Server hardware required on same purchase order
HP OneView for ProLiant DL Server incl 3yr 24x7 Supp FIO Bundle Physical 1 Svr Lic
HP OneView incl 3yr 24x7 Supp Bundle 1 Svr E-LTU
HP 9.5mm SATA DVD-ROM JackBlack Optical Drive
HP 9.5mm SATA DVD-RW JackBlack Optical Drive
HP Gen8 FIO Internal USB Kit
NOTE: Required to enable the internal USB port.
HP 1U FIO Friction Rail Kit
NOTE: Includes Rack Mounting Gen8 non-telescoping Friction Rail Kit which does not
allow for in rack serviceability. The HP 1U Gen8 Cable Management Arm is not available
when using Friction Rails. Caution: HP recommends that a minimum of two people is
required for all Rack Server installations. Please refer to your installation instructions
for proper tools and number of people to use for any installation.
NOTE: Additional Rack Options can be found in the "Additional Options" section of this
QuickSpecs.
DA - 14282 Worldwide — Version 22 — December 13, 2013
HP ProLiant DL160 Generation 8 (Gen8)
C6N36A
E5Y43A
E5Y43AAE
652238-B21
652241-B21
662961-B21
663200-B21
Page 24