Maintenance schedule
The following is a list of maintenance procedures that must be performed on the machine. For those points
not described in this manual, visit an authorized service workshop.
Maintenance
Check the engine oil level
Change engine oil
1)
Check the air filter
2)
Clean the air filter
Replace air filter cartridge
Clean sludge reservoir for fuel system
Check and clean the spark plug
Replace the spark plug
Check engine switch function
Check idle speed
Check and adjust play in valves
4)
Clean fuel tank
Check, replace fuel lines as necessary
Check throttle and cable
Check blade and cutter
Check decals and warning signs
Check wear and tension on the belts
Check the chassis, bolts and setscrews
Grease the blade bearings
Grease the wheels
Grease brake cable
Grease throttle cable
1)
First change after 20 hours.
4)
Performed by authorized service workshop.
= Described in this manual.
= Not described in this manual.
WARNING!
No service operations may be performed on the engine or unit unless:
•
The engine is stopped.
•
The ignition cable has been removed from the spark plug.
•
The machine is securely parked where it will not tip or begin rolling.
26 – English
MAINTENANCE
2)
3)
4)
4, 5)
3)
3)
3)
3)
2)
In dusty conditions maintenance is required at shorter intervals.
5)
Performed every second year.
Daily
Maintenance interval months/hours
maint.
Page
before
-/10
starting
36
36
29
28
29
30
31
31
19
30
-
-
-
19
33
4
32
-
35
37
37
37
3)
3/50
1/25
6/100
Before each use.
12/300