Table of Contents
Advertisement
RUNNING
Engine switch on the handle
Set the toggle switch to ON.
8011-184
Dead man's grip bar
Hold in the bar for the dead man's grip against the
handle.
8011-185
Starter handle
The dead man's grip must be pressed in when
starting the engine.
Misuse of the starter handle can damage the
starter. Do not twist the starter cord around your
hand.
Pull out the handle slowly until the gears mesh.
Then give a sharp pull on the starter handle. Do not
pull out the starter cord completely and do not let
go of the starter handle when extended.
8011-127
Throttle
Keep the throttle at idle. When the throttle is
increased, the cutting wheel will begin rotating.
8011-180
20 – English
Advertisement
Table of Contents
