NETGEAR N300 User Manual page 96

The following screen displays:
2. To enable the traffic meter, select the Enable Traffic Meter check box.
3. To record and restrict the volume of Internet traffic, select the Traffic volume control by
radio button.
You can select one of the following options for controlling the traffic volume:
• No Limit. No restriction is applied when the traffic limit is reached.
• Download only. The restriction is applied to incoming traffic only.
• Both Directions. The restriction is applied to both incoming and outgoing traffic.
4. To limit the amount of data traffic allowed per month, specify how many Mbytes per month
are allowed or specify how many hours of traffic are allowed.
5. Set the traffic counter to begin at a specific time and date.
6. Set up traffic control to issue a warning message before the monthly limit of Mbytes or hours
is reached.
You can select one of the following to occur when the limit is attained:
• The Internet LED blinks green.
• The Internet connection is disconnected and disabled.
7. Set up Internet traffic statistics to monitor the data traffic.
8. Click the Traffic Status button to get a live update about Internet traffic status on your
router.
9. Click Apply.
Your settings are saved.
N300 Wireless Router JWNR2000v3
Advanced Settings
96