To use the WPS Wizard:
1.
Select ADVANCED > WPS Wizard.
2.
Click Next.
The following screen lets you select the method for adding the WPS client (a wireless
device or computer).
3.
Select either Push Button or PIN, as follows:
•
To use the push button method, either click the WPS button on this screen, or press
the WPS/FastLane button on the back of the router. Within two minutes, go to the
wireless client and press its WPS button to join the network without entering a
password.
•
To use the PIN method, select the PIN radio button, enter the client security PIN, and
click Next.
Within two minutes, go to the client device and use its WPS software to join the
network without entering a password.
N300 Wireless Router JWNR2000v3
genie Advanced Home
41