NETGEAR N300 User Manual page 37

By default, FastLane is turned off, and WPS is turned on.
3. Select the amount of bandwidth to be reserved from the drop-down menu.
You can choose to reserve 50%, 60%, 70%, or 80% of the bandwidth.
4. Enter the trusted IP address.
5. Select the FastLane radio button.
6. Click Apply.
After you set up the FastLane feature, you can use the WPS/FastLane button on the back of
the router to turn FastLane on or off (see
Note: By default, the WPS/FastLane button is set up for WPS.
To change the WPS/FastLane button configuration:

1. Select BASIC > FastLane to display the FastLane screen.
2. Select either the WPS or FastLane radio button.
3. Click Apply.
N300 Wireless Router JWNR2000v3
Figure 3, Back panel
NETGEAR genie Basic Settings
37
on page 9).