Screensaver (For Preventing Image Retention); Function Selection - Panasonic TH-42PF20U Operating Instructions Manual

SCREENSAVER
Do not display a still picture, especially in 4:3 mode, for any length of time.
If the display must remain on, a SCREENSAVER should be used.
1
2

FUNCTION selection

3
MODE selection
4
START setting
5
36
(For preventing image retention)
Press to display the SET UP menu.
Press to select the SCREENSAVER.
Press to select the SCREENSAVER screen.
Press to select the FUNCTION.
Press to select the desired function.
NEGATIVE IMAGE
WHITE SCREEN
NEGATIVE IMAGE
SCROLLING BAR ONLY : A white bar will scroll from left to right. The image won't be displayed.
OVERLAY SCROLLING BAR : The brightness of the image will be decreased and a white bar
WHITE SCREEN
Note: OVERLAY SCROLLING BAR is not effective during two screen display.
Press to select the
MODE.
Press to select each
mode items.
When the MODE is set to ON, press to select START.
Press to start SCREENSAVER.
The menu screen will disappear and the SCREENSAVER will be activated. To stop the
SCREENSAVER under ON, press the R button or any buttons on the main unit.
Note: When the display is turned off, the SCREENSAVER will be deactivated.
SCROLLING BAR ONLY
OVERLAY SCROLLING BAR
: A negative image will be displayed on the screen.
will scroll on it.
: The whole screen will be white.
Off
INTERVAL : Operates when SHOW DURATION and SAVER
TIME OF DAY
: Operates when START TIME and FINISH TIME
STANDBY AFTER SCR SAVER : Operates while SCREENSAVER DURATION,
ON : Operates when START is selected and the
SET UP
SCREENSAVER
EXTENDED LIFE SETTINGS
INPUT LABEL
COMPONENT/RGB-IN SELECT
POWER SAVE
STANDBY SAVE
PC POWER MANAGEMENT
DVI-D POWER MANAGEMENT
AUTO POWER OFF
OSD LANGUAGE
SCREENSAVER
PRESENT TIME OF DAY 99:99
START
FUNCTION
MODE
DURATION are set up and those times arrive.
are set up and those times arrive.
and display enters standby mode.
ACTION ( ) button is pressed.
1/2
SIGNAL
RGB
OFF
OFF
OFF
OFF
OFF
ENGLISH ( US )
SCROLLING BAR ONLY
OFF