Table of Contents
Advertisement
Screensaver
Do not display a still picture, especially in 4:3 mode, for any length of time.
If the display must remain on, a Screensaver should be used.
When the screen saver is operating, the following 5 patterns are displayed full screen for 5 seconds each.
Black→Dark Gray→Gray→Light Gray→White
1
2
3
Mode selection
4
Start setting
(For preventing image retention)
Press to display the Setup menu.
Press to select Screensaver.
Press to display Screensaver screen.
Press to select Mode.
Press to select each
mode items.
When the Mode is set to On, press to select Start.
Press to start Screensaver.
The menu screen will disappear and the Screensaver will be activated. To stop the
Screensaver under On, press the R button or any buttons on the main unit.
Note: When the display is turned off, the Scrensaver will be deactivated.
Off
Interval
: Operates when Periodic Time and Operating
Time are setup and those times arrive.
Time Designation : Operates when Start Time and Finish Time
are setup and those times arrive.
Standby after SCR Saver : Operates while Screensaver duration, and
display enters standby mode.
On
: Operates when Start is selected and the
ACTION ( ) button is pressed.
Setup
1/2
Signal
Screensaver
Input label
Wobbling
Off
Component/RGB-in select
RGB
Power management
Off
Auto power off
Off
Off ( SERIAL )
Standby save
ECO
Off
OSD Language
English(UK)
Screensaver
PRESENT TIME MON 0 : 02
Start
Off
Mode
29
Advertisement
Table of Contents
