Remote Control Transmitter - Panasonic TH-42PF20U Operating Instructions Manual

Basic Controls

Remote Control Transmitter

ACTION button
Press to make selections.
ASPECT button
Press to adjust the aspect.
(see page 19)
Standby (ON / OFF) button
The Plasma Display must ¿ rst be plugged
into the wall outlet and turned on at the
power switch (see page 14).
Press this button to turn the Plasma
Display On, from Standby mode. Press
it again to turn the Plasma Display Off to
Standby mode.
POS. /SIZE button
(see page 26)
PICTURE button
(see page 29)
Sound mute On / Off
Press this button to mute the sound.
Press again to reactivate sound.
Sound is also reactivated when power is
turned off or volume level is changed.
N button
(see page 28, 29, 30, 34)
POSITION buttons
INPUT button
Press to select input signal sequentially.
(see page 16)
MULTI Window buttons
(see page 20)
18
OFF TIMER button
The Plasma Display can be preset to switch to stand-
by after a ¿ xed period. The setting changes to 30
minutes, 60 minutes, 90 minutes and 0 minutes (off
timer cancelled) each time the button is pressed.
30
When three minutes remain, "OFF TIMER 3" will À ash.
The off timer is cancelled if a power interruption
occurs.
AUTO SETUP button
Automatically adjusts the position/
size of the screen. (see page 26)
SET UP button (see page 24)
SOUND button (see page 34)
Volume Adjustment
Press the Volume Up "+" or Down "–"
button to increase or decrease the
sound volume level.
R button (see page 24)
Press the R button to return to
previous menu screen.
RECALL button
Press the "RECALL" button to
display the current system status.
Input label
1
2 Aspect mode (see page 19)
Audio input (see page 60)
NANODRIFT SAVER operating
(see page 39)
Off timer
3
The off timer indicator is
displayed only when the off
timer has been set.
Clock display (see page 57)
4
4 1 0 :0 0
Digital Zoom (see page 23)
60 90
0
1
PC
4:3
2
COMPONENT
NANODRIFT
OFF TIMER 90 3