Putting the MM 500-X into operation
3h
1
3s
8 |
MM 500-X
Putting the MM 500-X into operation
Before using the MM 500-X for the first time, remove the protection
strip from the battery pack.
Charging the battery pack
Before using the battery pack for the first time, charge it for at least
3 hours. The battery pack can also be charged inside the headset
during operation.
When charging the battery pack, the LED
red. When the battery pack is fully charged, the LED
lights up green.
º
When the battery pack is almost flat, the
short, descending acknowledgement tone.
The operating time of the battery pack depends on the device settings, the
listening situation and the audio sources used.
Type of use
Bluetooth technology
Remove the battery pack if the headset will not be used for
extended periods of time.
º
on the battery pack lights up
º
on the battery pack
1
LED
flashes red. You hear a
Operating time
10 hours