Sennheiser MM 500-X Instruction Manual page 23

If a problem occurs ...
1
5
1
2s
5
»
22 | MM 500-X
Resetting the settings of the MM 500-X
You can reset all settings of your headset to the factory default settings.
This allows you to prevent that other users of the headset can access your
Bluetooth enabled devices. You can then pair five new devices with the
headset.
Press the Master
flashes 3 times red. The headset switches off (see "Switching the
MM 500-X off" on page 14).
Press the Master
alternately flashes blue and red.
Press the Bluetooth
of the headset are reset.
5s
5
button and keep it pressed until the
5
button and keep it pressed until the
»
button for at least 5 seconds until the settings
1
LED
1
LED