Putting The Mm 450 Into Operation - Sennheiser Travel MM 450 Instruction Manual

Putting the MM 450 into operation

1
5
14
To disconnect the Bluetooth connection to the audio source, you can
switch off the headset or the Bluetooth function. This setting is retained
until the Bluetooth function is switched on again, even when you switch
the headset off in the meantime.
To switch the headset off:
Press the Master button
flashes 3 times red.
You hear a descending beep. The Bluetooth connection is automatically
deactivated. The headset switches off.
To switch the Bluetooth function off:
Press the Bluetooth button
flashes 3 times red. You hear a descending beep.
The Bluetooth button
off.
and keep it pressed until the
and keep it pressed until the
goes off. The Bluetooth function is switched
LED
LED