Preferences - Philips BTD7170 User Manual

[Audio Sync]: Set audio delay if audio and video
cannot be matched.
[Sound Mode]: Turn off or select your preferred
sound mode.
[Original] (original)
•
[Movie Mode]
•
[Music Mode]
•
• [Gaming] (gaming)
[News] (news)
•
[Night Mode]: Make loud sound level softer
and soft sound level louder so that you can
watch the DVD movies at a low volume,
without disturbing others.
[On]: enjoy quiet viewing at night (DVDs
•
only).
[Off]: enjoy surround sound with its full
•
dynamic range.

Preferences

On the [Preference] page, you can set the
following options:
[Audio]: Select the preferred audio language for
disc play.
[Subtitle]: Select the preferred subtitle language
for disc play.
[Disc Menu]: Select the preferred disc menu
language.
Note
•
If the language you have set is not available on the disc,
the disc uses its own default language.
•
For some discs, the subtitle/audio language can only be
changed from the disc menu.
[Parental Control]: Restrict access to discs that
are unsuitable for children. These types of discs
must be recorded with ratings.
1) Press OK.
2) Select a rating level, and then press OK.
3) Press the numeric keys to enter the
password.
22 EN
Note
•
Rated discs above the level you set in [Parental
Control] require a password to be played.
•
The ratings are country-dependent. To allow all discs to
play, select [8 Adult].
•
Some discs have ratings printed on them but are not
recorded with ratings. This function has no effect on
such discs.
[PBC]: Play VCD interactively according to the
menu screen.
• [On]: the menu screen is displayed.
[Off]: normal play is resumed.
•
[Password]: This setting allows you to change
the password for parental control. The default
password is 000000.
1) Press the numeric keys to enter '000000'
or your last set password at [Old
Password] field.
2) Enter the new password at [New
Password] field.
3) Enter the new password again at [Confirm
PWD] field.
4) Press OK to exit the menu.
Note
•
If you forget the password, enter '000000' before you
set a new password.
[DivX Subtitle]: Select a character set that
supports the DivX subtitle.
Note
•
Ensure that the subtitle file has the exact same file
name as the movie file. If for example the file name of
the movie is 'Movie.avi', and then you will need to name
the text file 'Movie.sub' or 'Movie.srt'.
[Version Info]: Display the software version of
this device.
[Default]: Reset all the settings to factory
default, except for the password and parental
settings.