Preferences - Philips MCD5110 User Manual

[Night Mode] (Night Mode)
Make loud sound level softer and soft sound level
louder so that you can watch the DVD movies at
a low volume, without disturbing others.
• [On] (On) – enjoy quiet viewing at
night (DVDs only).
• [Off] (Off) – enjoy surround sound
with its full dynamic range.

Preferences

On the [Preference] (Preference) page, you can
set the following options:
[Audio] (Audio)
Select the preferred audio language for disc play.
[Subtitle] (Subtitle)
Select the preferred subtitle language for disc play.
[Disc Menu] (Disc Menu)
Select the preferred disc menu language.
Note
•
If the language you have set is not available on the disc,
the disc uses its own default language.
•
For some discs, the subtitle/audio language can only be
changed from the disc menu.
[Parental Control] (Parental Control)
Restrict access to discs that are unsuitable for
children. These types of discs must be recorded
with ratings.
1) Press OK.
2) Select a rating level, and then press OK.
3) Press the numeric keys to enter the
password.
Note
•
Rated discs above the level you set in [Parental
Control] (Parental Control) require a password to be
played.
•
The ratings are country-dependent. To allow all discs to
play, select [8 Adult] (8 Adult).
•
Some discs have ratings printed on them but are not
recorded with ratings. This function has no effect on
such discs.
[PBC] (PBC)
Play VCD interactively according to the menu
screen.
• [On] (On): the menu screen is
displayed.
• [Off] (Off): normal play is resumed.
[Password] (Password)
This setting allows you to change the password
for parental control. The default password is
000000.
1) Press the numeric keys to enter '000000'
or your last set password at [Old Password]
(Old Password) field.
2) Enter the new password at [New
Password] (New Password) field.
3) Enter the new password again at [Confirm
PWD] (Confirm PWD) field.
4) Press OK to exit the menu.
Note
•
If you forget the password, enter '000000' before you
set a new password.
[DivX Subtitle] (DivX Subtitle)
Select a character set that supports the DivX
subtitle.
Note
•
Ensure that the subtitle file has the exact same file
name as the movie file. If for example the file name of
the movie is 'Movie.avi', and then you will need to name
the text file 'Movie.sub' or 'Movie.srt'.
[Version Info] (Version Information)
Display the software version of this device.
[Default] (Default)
Reset all the settings to factory default, except
for the password and parental settings.
EN 21