Philips BTD7170 User Manual page 14

Before you start
• Connect your product to the HDMI-
CEC compliant device through HDMI
connection.
• Make the necessary connections described
in the quick start guide, and then switch
the TV to the correct source for your
home theater.
Enable EasyLink
1
Press .
2
Select [Setup], and then press OK.
3
Select [Video], and then press OK.
4
Select [HDMI Setup]> [EasyLink Setup] >
[EasyLink] (EasyLink)> [On].
5
On your TV and other connected devices,
turn on HDMI-CEC control. For details, see
the user manual of the TV or other devices.
• On your TV, set the audio output to
'Amplifier' (instead of TV speakers).
For details, see the TV user manual.
EasyLink controls
With EasyLink, you can control your home
theater, TV, and other connected HDMI-CEC
compliant devices with a single remote control.
• [1 Touch Play] (One-touch play): If one-
touch play is enabled, press
remote control of your home theater to
wake up the TV from standby.
[1 Touch Standby] (One-touch standby): If
•
one-touch standby is enabled, your home
theater can switch to standby with the
remote control of the TV or other HDMI-
CEC devices.
[Sys Audio Control] (System audio
•
control): If system audio control is enabled,
the audio of the connected device is output
through your home theater speakers
automatically when you play the device.
• [Audio Mapping] (Audio input mapping): If
system audio control does not work, map
the connected device to the correct audio
input connector on your home theater.
12 EN
on the
Note
•
To change the EasyLink control settings, press
select [Setup] > [Video] > [HDMI Setup] > [EasyLink
Setup] > [EasyLink].
Set up the audio
If you cannot hear the audio output of a
connected device through your home theater
speakers, do the following:
• check if you have enabled EasyLink on all
the devices, and
• on your TV, set the audio output to
"Amplifier" (instead of TV speakers). For
details, see the TV user manual, and
• setup the EasyLink audio control.
1
Press .
2
Select [Setup], and then press OK.
3
Select [Video], and then press OK.
4
Select [HDMI Setup] > [EasyLink Setup]
> [Sys Audio Control] (System audio
control) > [On].
• To play the audio from the TV
speakers, select [Off], and skip the
following steps.
5
Select [HDMI Setup] > [EasyLink Setup]
> [Audio Mapping] (audio mapping).
6
Follow the on-screen instructions to map
the connected device to the audio inputs
on your home theater.
• If you connect your home theater
to the TV through an HDMI ARC
connection, make sure that the TV
audio is mapped to the ARC input on
your home theater.
,