Accessories; Accessories Supplied; Remote Control Batteries - Panasonic TH-50PB2U Operating Instructions Manual

Accessories

Accessories Supplied

Check that you have the Accessories and items shown
Operating
Instruction book
Clamper × 1
TMME289

Remote Control Batteries

Requires two AA batteries.
1. Pull and hold the hook, then
open the battery cover.
Helpful Hint:
For frequent remote control users, replace old batteries with Alkaline batteries for longer life.
Precaution on battery use
Incorrect installation can cause battery leakage and corrosion that will damage the remote control transmitter.
Disposal of batteries should be in an environment-friendly manner.
Observe the following precautions:
1. Batteries should always be replaced as a pair. Always use new batteries when replacing the old set.
2. Do not combine a used battery with a new one.
3. Do not mix battery types (example: "Zinc Carbon" with "Alkaline").
4. Do not attempt to charge, short-circuit, disassemble, heat or burn used batteries.
5. Battery replacement is necessary when the remote control acts sporadically or stops operating the Plasma Display.
6. Do not burn or breakup batteries.
7. Batteries must not be exposed to excessive heat such as sunshine, fi re or the like.
8
Software CD-ROM × 1
• Panasonic WhiteBoard Software
• Operating Instructions
Display Operations
Network Operations
Electronic Pen Operations
• Software license statements
GNU GENERAL PUBLIC LICENSE
GNU LESSER GENERAL PUBLIC LICENSE
AC cord
2. Insert batteries - note correct
polarity (+ and -).
Remote Control Transmitter
N2QAYB000691
Ferrite core × 2
J0KG00000014
Use the Ferrite cores to comply with the EMC standard.
(refer to "Operating Instructions, Network Operations")
"AA" size
-
+
+
-
Batteries for the
Remote Control
Transmitter
(AA Size × 2)
Electronic Pen set
Refer to "Operating Instructions,
Electronic Pen Operations".
3. Replace the cover.