Basic Controls - Panasonic TH-50PB2U Operating Instructions Manual

Basic Controls

Main Unit
Brightness Sensor
Detects the brightness in the viewing environment
Remote control sensor
Main Power On / Off Switch
Power Indicator
The Power Indicator will light.
• Power-OFF .... Indicator not illuminated (The unit will
still consume some power as long as the
power cord is still inserted into the wall
outlet.)
• Standby ......... Red
Orange (When "Slot power" is set to
"On" and Terminal Board is installed. See page 54)
Orange (Depending on the type of the function board installed, when the power is supplied to the
slot)
Orange (When "CONTROL I/F SELECT" is set to "LAN" or "WEB CONTROL" is set to "ON". Refer
to "Operating Instructions, Network Operations".)
Orange (When "QUICK WHITEBOARD LAUNCH" is set to "ON". See page 36)
Orange (When "STANDBY PEN CHARGING MODE" is set to "ON" or "ON[4hrs]". See page 37)
• Power-ON ...... Green
• PC POWER MANAGEMENT (DPMS)
........................ Orange (With PC input signal.
See page 44)
• DVI-D POWER MANAGEMENT
........................Orange (With DVI input signal. See page 44)
18
+
INPUT MENU -/ VOL
MENU Screen ON / OFF
Each time the MENU button is pressed, the menu screen
will switch. (see page 23)
INPUT button (Input signal selection)
(see page 17)
Volume Adjustment
Volume Up "+" Down "–"
When the menu screen is
displayed:
"+" : press to move the cursor up
"–" : press to move the cursor down
(see page 23)
Enter / Aspect button
(see page 20, 23)
/ ENTER/
Normal Viewing PICTURE
SOUND POS./SIZE
SETUP