Scanning; Scanning To An Ftp Address - Lexmark MX310dn User Manual

Scanning

Scanning

Scanning to an FTP address

Automatic document feeder (ADF)
Use the ADF for multiple‑page documents including
two-sided (duplex) pages.
The scanner lets you scan documents directly to a File Transfer Protocol (FTP) server. Only one FTP address may be
sent to the server at a time.
When an FTP destination has been configured by your system support person, the name of the destination becomes
available as a shortcut number, or it is listed as a profile under the Held Jobs icon. An FTP destination could also be
another PostScript printer.
Creating shortcuts
Creating an FTP shortcut using the Embedded Web Server
1
Open a Web browser, and then type the printer IP address in the address field.
Notes:
• View the printer IP address in the TCP/IP section in the Network/Ports menu. The IP address appears as four
sets of numbers separated by periods, such as 123.123.123.123.
•
If you are using a proxy server, then temporarily disable it to load the Web page correctly.
2
Navigate to:
Settings > Other Settings area > Manage Shortcuts > FTP Shortcut Setup
3
Enter the appropriate information.
Note: A password may be required. If you do not have an ID and password, then contact your system support
person.
Scanner glass
Use the scanner glass for single-page documents, book pages, small
items (such as postcards or photos), transparencies, photo paper, or
thin media (such as magazine clippings).
94