Fax Settings Menu - Lexmark MX310dn User Manual

Understanding the printer menus
Use
Adjust ADF Skew
Auto
Off
On
Scan edge to edge
Off
On
Sharpness
1–5

Fax Settings menu

Fax Mode (Analog Fax Setup) menu
Analog Fax Setup mode sends the fax job through a telephone line.
Use
Fax Name
Fax Number
Fax ID
Fax Name
Fax Number
Enable Manual Fax
On
Off
Memory Use
All receive
Mostly receive
Equal
Mostly send
All send
Cancel Faxes
Allow
Don't Allow
To
Correct slight skew in the scanned image.
Note: Auto is the factory default setting.
Specify if the original document is scanned edge‑to‑edge.
Note: Off is the factory default setting.
Adjust the amount of sharpness of a copy.
Note: 3 is the factory default setting.
To
Specify the name of the fax in the printer.
Specify the number assigned to the fax.
Specify how the fax is identified.
Set the printer to fax manually, which requires a line splitter and a telephone handset.
Notes:
•
Off is the factory default setting.
•
Use a regular telephone to answer an incoming fax job and to dial a fax
number.
•
Press # 0 on the numeric keypad to go directly to the Manual Fax function.
Define the allocation of non-volatile memory between sending and receiving fax jobs.
Notes:
• "Equal" is the factory default setting. This splits the memory for sending and
receiving fax jobs into equal amounts.
• "Mostly send" specifies that most of the memory is set to send fax jobs.
•
"All send" specifies that all the memory is set to send fax jobs.
•
"All receive" specifies that all the memory is set to receive fax jobs.
• "Mostly receive" specifies that most of the memory is set to receive fax jobs.
Specify whether or not the printer cancels fax jobs.
Note: Allow is the factory default setting.
125